Remote Control Home Automation Using PIC Controller

Project Description:

1. PIC16F877A: The PIC16F877A features 256 bytes of EEPROM data memory , self programming,an lcd display port,2 comparator,8 channels of 10-bit Analog-to-Digital(A/D) converter,2 capture/compare/PWM functions,the synchronous serial port can be configured as either 3-wire Serial peripheral Interface or the 2-wire inter-integrated circuit(I2C) bus and a Universal Asynchronous Receiver Transmitter(USART).These features make it advanced level A/D applications.
2. TSOP1738: The TSOP1738 is an infrared receiver turned to receive IR frequency 38KHz. It is perfect to read the signals from most IR remotes(tv remotes),used as a receiver in distance sensors,it provides better performance as it allows better reception and protection from ambient light compared to other IR receivers. It has three pins terminal such as Ground,VCC and OUT pin
3. Relay: A relay is an electrically operated switch.It can handles the high power required to directly control an elecric motor or other loadas is called relay or contactor.

Project Implementation:

1. Connect the TSOP1738 to PIC Controller
2. Connect the Relay to the controller the loads connected via relay
3. You need to program as the receives the signal controller checks the program the relay is turned ON/OFF

Software requirements:

1. MPLAB X IDE: The MPLAB X IDE is the new graphical,integrated debugging tool set for all of Microchps's more than 8 bit,16 bit and 32 bit MCUs and digital signal controller,and memory devices.
2. Programming language: Embedded C Language
3. Proteus Design Software: The Proteus Design Suite is a software tool suite used for eletronic design automation even only sotware itself the output can be checked by the software and also electronic prints for manufactureing printed circuit boards.

• PIC16F877A
• Relay
• TVRemote
• rc technology
• lamp holder

• rc technology