How to Develop an RC Ornithopter

Project Description:

1. FRAME: Acrylic sheet or carbon fiber material
2. GEARS: To transmit the power
3. MOTOR: BLDC motor can be used as a power plant
4. ESC: Electronic Speed Controller used for controlling the speed of the BLDC motor
5. BATTERY: Lipo battery can be used as Power source
6. FEATHER: Fibre material.
7. FEATHER AND TAIL: Spokes is used for making of those
8. SERVO: Two 9g servo
9. TRANSMITTER AND RECEIVER: 2.4GHZ TX and RX. It should have a minimum 5 channels

Project Implementation:

1. Assemble all the materials given in the project description properly
2. Take enough Fibre material place over on the wing. Cut out the material that you want to be fixed on the wing.
3. Stick the fiber material using super glue
4. Place the battery to the frame and balance the CG
5. Make sure all the servo motor and bldc motor are fixed tightly
6. Connect the battery to the ESC and check the all the controls surfaces by flipping the transmitter stick
7. Now you can go for flying

• gun frame
• Gears
• Lipo Battery
• transmitter
• ESC
• BLDC Motor
• Servo motor
• fiber reinforced composite

• Aerodynamics
• Radio frequency