RC Helicopter

Published on 20 May 2022. Written by Dhilan Mandaliya

Remote Controlled helicopter world there are basically of two types one with two types of blades on top (co axial blades) and once with one side of blades on top. And a active tail motor/rotor at the back which will give yawing stability (newton third Law). they also have gear and shaft for drive. Vet cool about this helicopter is that you can fly around your house. There are two motors one is at front which will control the rotation of helicopter with help of ESC and second one is micromotor at the tail part with micro prop. Lipo battery as a continuous power source for your model servo for bending of Swash plate

3.7 volt 600mah battery : A rechargeable battery, storage battery, secondary cell, or accumulator is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells.
Battery charger : which can recharge the battery from by converting Electrical energy in to chemical energy.
Transmitter Receiver : A set of equipment used to generate and transmit electromagnetic waves carrying messages or signals, especially those of radio or television.In radio communications, a radio receiver (receiver or simply radio) is an electronic device that receives radio waves and converts the information carried by them to a usable form. It is used with an antenna.
Micromoters : Micromotors are very small particles (measured in microns) that can move themselves. Thesemicromotors actually propel themselves in a specific direction autonomously when placed in a chemical solution.
BLDS motor (1400kv ): This DC or direct current motor works on the principal, when a current carrying conductor is placed in a magnetic field, it experiences a torque and has a tendency to move. This is known as motoring action. If the direction of current in the wire is reversed, the direction of rotation also reverses.
Polyform/coro form : Basically it a hollow light weight material of plastic material which you can cut and bend according to your requirement.

Final Step:

congrats you have made a RC Helicopter you just need some Flying technique and good weather condition. BEST OF LUCK

Kit required to develop RC Helicopter:

Technologies you will learn by working on RC Helicopter:

RC Technology

RC Helicopter

Final Step:

Any Questions?

Subscribe for more project ideas