Radio-Controlled Flying Wing

Published on 19 May 2022. Written by Dhilan Mandaliya

Radio Controlled flying wing one type of elongated or extended wing aircraft having more surface area on wing creating more lift.There are no embellishments or fuselage, its lightweight and fairly easy to assemble of these aircraft are having Delta shape (triangular). Its a kind of delta wing Aircraft having high speed as compared to commercial aircraft. The lift and thrust forces are much more than normal aircraft. Basically, they are made fabricating one long piece of Wood/ Coroplast/ Polyforms.

Project Description:

For making Delta wing you need lithium polymer (LiPo) batteries to stay in the air for long periods of time. The batteries operate a propeller and two or more than two servos – little motors that receive commands from a transmitter on the ground. The pilot moves the control surfaces on the aircraft to maneuver it. Carbon fiber spars are embedded in the wing to provide stability and control.

Components or kit require for Flying wing are as follows:

Balsa elevons
Coroplast winglets
Paper Tape
Control horns and control rods
Polyform for wings
Plastic tape

Required electronic components for project:

Radio-control receiver.
Servos (micro)
NiMH battery
Battery Charger.
Radio-control transmitter
12 grams servos
push propeller

Kit required to develop Radio-Controlled Flying Wing:

Technologies you will learn by working on Radio-Controlled Flying Wing:

Radio-Controlled Flying Wing

Project Description:

Components or kit require for Flying wing are as follows:

Required electronic components for project:

Any Questions?

Subscribe for more project ideas