Mobile Phone Controlled Electrical Devices Switching

Published on 02 Jul 2021. Written by Karthy R

Mobile Phone Controls Electrical Devices Switching

The project involves controls the electrical devices that can be controlled by sending the instructions to the mobile phone that is connecter with it. The Control functions using the DTMF (Dual Tone Multiple Frequency) technology to establish the connection.

The circuit will be embedded with DTMF decoder/encoder and you will be needs two mobile phones to makes this project. One phone will be placed in the control box itself which will be receive the signals from the user and another phone used to send the signal to the control box of the electrical devices are connected. The Circuit uses the 8051 microcontroller to process the incoming commands and actuates the Relay accordingly. The Relay trips to change its state so the power is applied to the device connected to the relay is turned ON and turned it OFF.

You need to program the 8051 microcontroller in such a way that whenever it receive the command from the user through the DTMF technology.

Project Description:

AT89S52: The AT89S52 is a low power, high performance CMOS 8-bit microcontroller with 8k bytes of in-system programmable flash memory. This is a powerful microcontroller which provides high flexibility and cost effective solution to many embedded control applications. It has the following standard features: 8K bytes of flash, 256 bytes of RAM, 32 I/O lines, watchdog timer, 2 data pointers, 3 16-bit timers/counters, on-chip oscillator and clock circuitry.
Relay: A relay is an electrically operated switch.It can handles the high power required to directly control an elecric motro or other loadas is called relay or contactor.
DTMF: The DTMF decoder module will recognize the DTMF tone and gives 4 bit data to the controller.

Project Brief: The mobile phone call to the particular mobile which is connected to controller so gets the dual frequency signal corresponding relay is trips the load gets truned ON and OFF respectively.

Software requirements:

Keil Uvision 3: Keil Software makes C compilers, macro assemblers, real-time kernels, debuggers, simulators, integrated environments and evaluation boards for the 8051, 251, ARM and XC16x/C16x/ST10 microcontroller families
Programming language: Embedded C language

Kit required to develop Mobile Phone Controlled Electrical Devices Switching:

Technologies you will learn by working on Mobile Phone Controlled Electrical Devices Switching:

Mobile Phone Controlled Electrical Devices Switching

Project Description:

Software requirements:

Any Questions?

Subscribe for more project ideas