Latest Projects Based on Wireless

Night vision spy bot is a unique type of robotic system which can be used for spying on enemy territories. This type of robots can be used to collect information and monitor suspicious activities, even we can track location of terrorist organizations. These type of robots can be used for surveillance of any disaster affected area or a place which is difficult to reach. Its night vision camera makes it active and effective even in darkness using infrared lighting.

In our home devices are controlled with help of switches,sensor .Sometimes it dangerous if it physical contact with home appliances.To overcome these drawback the Light Dependent Resistor is replaced here so just pass the hand near to the LDR then the device is ON and to turn OFF again pass the hand above LDR is placed.

The advent of technology has brought a revolutionary change in the field of robotics and automation which ranges in all the sectors from household domestic works to the defense sector. Today in the global market, smart phones also have brought a revolution in changing people’s lifestyle and providing numerous applications on different operating systems. Android operating system is one of these systems build on open source which has made a huge impact providing many applications for robotics to help people in their day today life.

With rapid development in conversion of communication with wires (land lines) to communication without wires (mobile phones), life has been revolutionised. The dream of radio engineering has come true. Now-a-days, many advancements in the mobile phones were introduced. Some of these advancements provide many services such as text, internet etc. But although there are many advancements in the technology, we still rely on the wired battery chargers.

Today almost all railway stations, bus stations are using Digital Display boards to show the all kinds of information, but they are connected wires. Through the project you are going to build a unique system where you can give provide information on the Electronic Notice Board in Wireless manner(where that notice board are controlled by an SMS using GSM modem). This modem uses a SIM card and operates through a subscription with the mobile operator. Many people they don’t know how to interface GSM module with 8051 microcontroller. We will see a series of steps describing how GSM modem will be interfaced with 8051 microcontroller.

Nowadays Smartphones are common to all. Mobile phones have become a daily need where most of our works are done through it. The most common problem we face while using mobile phones is Charge in mobile. Through this project, you are going to build a unique project where mobile charging through coin boxes.

Right now the most important and common thing for each and every one is Mobiles or Smartphones. But the problem we regularly face while using them is charging. So imagine there is a plug in the car which you can use it for charging mobile. The Power required for charging your mobile will be generated from the wheels. Does it sound new?? Yes, that’s true. Through this project, you are going to build a system where you can charge your mobile with the power generated from the motion of the wheels of your car.

Rubik’s cube is a puzzle which everybody cannot solve easily, a person needs to calculate and then twist the cube to match the colors of each side. How exciting would it be if a robot can solve a Rubik’s cube? If a person is solving a Rubik’s cube, then he checks the pattern of all the sides in the cube and calculates what should be the movement of the cube to match the colors of each side. This Rubik’s cube solver robot does the same.

Glider is nothing but a type of Aircraft which can fly up to a certain amount of time depending on the design and the area of lifting surface. They might have an engine for altitude gliding which can be turned off after critical lift generation. There are wide varieties differing in the construction of their wings, aerodynamic efficiency, location of the pilot, controls and intended purpose. Some basic lightweight materials like wood, plastic, and other polymer foams are generally used for manufacturing gliders.

Imagine there is a Robot which can be controlled from anywhere in the world. Is it possible?? Yes, it is possible with Wi-Fi Technology. Through this project you are going to build a unique Walking Robot which can be controlled using Wi-Fi.

The military robot utilization of robotics technology for fighting terror and defense of the nation. The human lives are highly valuable, the soldier lives more important to stay us alive in the combat field.

This project is all about controlling the door lock system with a remote control with the help of Wireless Remote Control Switch mostly in manual door locking system you usually forget the keys or you will keep some somewhere or you will sometime forget the keys inside the room. You will not phase those kinds of problems after doing wireless smart remote control.

The AMR system enables remote access of existing energy meter by the energy provider. AMR system aims to move away from the traditional method of manual reading of electricity meters in which a meter reader visits every meter location periodically and read the meter value manually.

Wireless Power Transfer technology removes the disadvantage of using the wired technology that is prevalent today. Certain drawbacks of wired power transfer technology being used are the reason for adopting wireless power transfer technology.

One of the major problems that is been faced by the planet earth is insufficient supply of the clean energy. we are simultaneously facing the three challenges – they are resource consumption, environmental degradation, and population growth.

Transferring data between smartphones is quite easy with the help of apps like xender and share it. But when you are switching over a brand PC, data transfer from your old to new PC is sure to bring down your excitement. In this project, you will learn to transfer data using a cheap RF module (433 MHZ) and Arduino.

We all love to watch TV, don't we? Whether it's India’s cricket match or your mother's favorite serial, it is safe to say, that every Indian household would be incomplete without a TV. Ever since its creation, the TV has been changing the way we consume media.

If you are using a remote-controlled robot it will work on RF circuits which come with very limitations. You will have a limitation of control and frequency.  Nowadays cell phone operated land rovers are used which provides us with a good working range and control. We use a mobile phone to control it. It has vast capabilities. The cell phone is implemented by making a phone call. There are three steps by which we will take control of the rover. Firstly, we will have a perception face. After that, we will start processing and then the action takes place.

With the blast of Smart Phones, Internet of things (IoT), Industrial Automation, Smart Home Automation systems and so forth the interest for internet is likewise developing exponentially. The technology has developed such a lot of that everything from our vehicle to our refrigerator needs an association with the web. This brings up different issues like; Will there be sufficient data transmission for every one of these gadgets? Will this information be secure? Will the current system be quick enough for everyone of this information? Will there be an excessive amount of combination on the network traffic?

Introduction:

Wireless power transmission is the effective transfer of power from one point to another through any medium or vacuum without the use of wires. It is used where there is an immediate or continuous energy need. The solar project focuses on delivering energy to devices using low power using wireless transmission. Resonating coils play a vital role here transmitting power from an ac source to resistive load.

Episodes like robberies, house invasions are normal nowadays. What is unprecedented, however, is an individuals' awareness about various frameworks like a security system, camera and buzzer frameworks and so forth. Installing all these various detectors so as to keep the house secure is additionally something that is hard to keep up. Here, we have planned a coordinated home security framework that would assist individuals with verifying their homes from such occurrences.

The primary purpose of this wireless black-box model is to build a black box device for automobiles which can be mounted into any vehicle worldwide. This concept is often formulated with minimal circuit area.

The field of healthcare has undergone some great innovations over the years. Today we have extraordinary mechanisms to treat and cure diseases. There are even inventions that can keep someone alive by giving proper support for years. The ICU or intensive care unit a lifesaving system that most hospitals have today. Patients whose condition is in a dangerous case are admitted to this unit for the superior treatment. Most patients who are admitted need to have continuous monitoring. So we have an IoT based ICU patient monitoring system.

Electrical shocks no matter how small it can be dangerous in many ways. Electrocution from even a small household circuit can have various detrimental effects on the victim. So we can imagine the level of consequences in case of an electric shock from high power lines. The electrical maintenance workers are working in a very dangerous situation with higher voltage lines daily. If something goes wrong the result can be fatal. A better and remotely accessible circuit breaker system can be a safer option to use when it comes to working on high power lines.

Prison breaks sound like no sort of big deal for normal people like us. But in reality, it is happening around the world. The impact of these is also upon every civilian which includes all of us. Government authorities for a long time have come up with a lot of ideas to stop prisoners from breaking out. With the improvements in technology, the systems became more and more reliable. Today we will be looking at a prison break monitoring system that works with the power of IoT.

Smart building refers to the place where the system can keep a track of people and maintains a database. The building will be used to get information about the number of people, usage of resources, etc. Such type of buildings is known as Smart buildings. To run that type of building we will need a system which can track people with the help of sensors and then display the results visually. Let’s have a brief look at the smart building using IoT project.

Design your own Bluetooth controlled RC car. You can do it as a mini project in your academics. In this project, you will learn the types of components used to have input and output, usage of Bluetooth connectivity and interfacing them to other electronic devices like Arduino, raspberry pi.

Overview

How do we use a fan, we usually turn on the fan manually. But If the control is in your hands the speed control would be easy. Because there is no need to go near switchboard and vary fan speed. Easy process right? Yes, you heard that right! Control in your hands. This mini-project will make that process easy. We use the Bluetooth connectivity to control the speed of fan remotely. We use the combination of microcontroller and Bluetooth connectivity to achieve the purpose to control the speed of the fan.

Imagine you want to display your name on LCD display in front of your door or wherever you want. You want to change it again and again. In this Bluetooth controlled LCD project you will learn to display information on the LCD display and to change it via Bluetooth. We can change it over and over during necessity arises. We are using Bluetooth connectivity for this purpose. So, the command can be given only over the range of area of Bluetooth.

Espionage robots are not best suited for surveillance on rugged terrain because of its wheeled systems. Due to the inability to operate on rugged terrain, robotics and drones get jammed.

Here the model presents a rugged terrain beetle robot that can quickly move across jungles, hilly and rocky areas with minimal effort. Its compact size helps it to travel across rugged terrain like a little animal with little noise moving through the forest. To perform this function the robot uses a crawling method.

Drones are getting advanced day by day and their usage also increased in various fields. With the help of drones, you can able to accomplish various types of missions by spending less. In this drone project, we will discuss how to build a drone with terrain following mode using the Mission Planner software.

Hacking someone’s Wi-Fi and sniffing their tasks is actually a cool thing to do but also it is illegal. Wireless networks are available to anyone within the routers broadcast area which makes it vulnerable for attacks. In this ethical hacking project, we are going to simulate a man-in-the-middle attack in a friendly network using dSploit android application. This project is for learning purpose only. Perform this simulation on your own Wi-Fi network 

Overview

Bluetooth is a wireless communication device used to transfer data from one device to another. It is the simplest way to transfer data using port addresses of the devices. Nowadays, Bluetooth is installed in every device and anyone uses it simply. Bluetooth with MATLAB is the new way of communicating efficiently between devices. We will use MATLAB on one side and Arduino on the other side.

In this MATLAB project, we will establish a secure connection between the different devices using these two tactics. Well, there are many ways to make the connection but we will see the simplest one.  

Latest Projects based on wireless