Latest Projects Based on Pump

According to survey in india nearly 25,000 people die every year due to fire and related causes and the loss due to these fire incidents is more than Rs.100 crores. Even though there are lot of precaution taken to prevent the fire there are accidents happening everywhere, so we have to kill the fire before it kills us. In a fire breakout the firefighters are restricted to go near the fire as the intensity of the fire is high in some cases, In order to overcome this we can build an autonomous firefighting robot which can help the firefighters in reducing the heat of the fire.

One of the biggest networks where people work as groups in the field of Agriculture. As technology is increasing and automation is replacing manual operation in almost all the fields, the same can be applied to the Agricultural Field also. Previously farmers manually used to water the fields whenever needed and power for providing the water is taken from household power. The cons of this system are we need to pay for the power and every time human intervention is needed whenever water needs to be provided. Imagine there is an automatic system where whenever water is needed for the field, automatically pump will be turned on and when water level sufficient, the pump will be turned off automatically and the power required for the operation of the pump will be taken from the solar power.

Water jet cutting method is one of the material removal type of rapid prototyping technique (RPT) which is been widely used in the automotive and aerospace industry to produce the complex and precise shape on a metal with minimum time and least effort being used.

The conventional method of machining work-piece by formation of chips is very inefficient and expensive method on many counts. In view of these adverse and limiting characteristics of above conventional machining process, considerable effort has been made during the last few decades in developing and perfecting a number of newer methods, AJM is one of them which do not produce chips like conventional machining type.

Through this project you are going to build an innovative project where smart irrigation technique with maximum power tracking technique through dual axis solar panel application.

During rainy season,floods are very natural to occur. But if they occur heavily then problem will arise. Through this project you are going to build an automatic protection system for dams and reservoirs through IoT based water monitoring technique.

Water is the natural resource, once an abundant natural resource, is becoming a more valuable commodity due to droughts and overuse. Many efforts on the development of water system have been made through for sustainable water supply.

The Programmable Logic Controller is widely known in the automation field. And in the modern world, it is applied to the most of the manufacturing industries. In industries, the PLC is used to control the movements of machines or heavy machines in order to create high productivity of products.

Water is the world’s most precious resource, yet it is also the one which is almost universally mismanaged. As a result, water shortages are becoming ever more common. Leakages, overflow of water and bursting of pipes these all most common in waste of water. So as to detect all these problems here you are going to work on the building, tank water level sensing monitoring and water pipeline leakage sensing monitoring system.

The socio-economic conditions of farmers living in villages of developing countries including India, human muscle power can be a good alternative to fulfill the energy requirements for performing many activities like water pumping. This work will eliminate the use of motor and engines to run the pump and it will use the energy which will not create any pollution. Pedaling is the most efficient way of utilizing power from human muscles. Keeping these things in mind you are going to build a pedal operated water pump.

To implement this project two single acting reciprocating pump is to be used. To supply continuous discharge, you have to connect two reciprocating pumps drive shaft. The drive shaft is powered by the foot pedals, using chain drive mechanism. The setup is built by using locally available materials to reduce the overall cost of the pump unit. Discharge of the pump is calculated theoretically as well as actually. The current work will be extended by using a hybrid mechanism to use both human power and other renewable energies.

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery.Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

About the project

Centrifugal pumps are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.

A turbopump is a propellant pump with a rotodynamic pump and a driving gas turbine. The purpose of a turbopump is to produce a high-pressure fluid for feeding a combustion chamber or other use.

About the project

An axial-flow pump, or AFP consists of a propeller in a pipe. The propeller can be driven directly by a sealed motor in the pipe or by electric motor or petrol/diesel engines mounted to the pipe from the outside or by a right-angle drive shaft that pierces the pipe.

A diaphragm pump also known as a Membrane pump is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or Teflon diaphragm and suitable valves on either side of the diaphragm to pump a fluid. There are three main types of diaphragm pumps.

Some people have gardening as a hobby. They spend their spare time in their gardens. However, because of the increasing pace of life, some of them are not able to find time for gardening. In this project, you will try to help these people.

Farmers normally operate on broad portions of the field to develop numerous crop varieties. It's not always easy for a single person to maintain control of the entire agricultural land all the time. Often a certain area of the land may receive more water which may lead to sludge or it may receive very little water that dries the soil. The crops may get affected in any of the situations, and farmers may suffer damage.

Latest Projects based on pump