Electronic Eye Controlled Security System with IoT

Project Description:

1. Arduino/Genuino Uno: The digital and analog input/output pins equipped in this board can be interfaced to various expansion boards and other circuits. Serial communication interface is a feature in this board, including USB which will be used to load the programs from computer.
2. LDR (Light Dependent Resistor): An LDR can be called as variable resistor controlled by intensity of light. Whenever the LDR is in very low light, the resistance value of the LDR will be very high (in Mega Ohms). Similarly Whenever the LDR is under normal light the resistance value of the LDR will be very less comparatively (in order of 10^2 Ohms).
3. 7805 IC: IC 7805 is an integrated circuit which can used as a voltage regulator. It is an electronic circuit that provides a stable DC voltage independent of the load current, temperature and AC line voltage variations. A voltage regulator may use a simple feed-forward design or may include negative feedback. Depending on the design, it may be used to regulate one or more AC or DC voltages.
4. Buzzer: A buzzer is a device gives audio signals, which may be mechanical, electromechanical, or piezoelectric. Typical uses of buzzers and beepers include alarm devices, timers, and confirmation of user input such as a mouse click or keystroke.
5. IN4007 IC: The 1N400x (or 1N4001 or 1N4000) series is a family of popular 1 A general-purpose silicon rectifier diodes commonly used in AC adapters for common household appliances. Its blocking voltage varies from 50 volts (1N4001) to 1000 volts (1N4007).
6. Wi-Fi Module : ESP8266 Wi-Fi module is generally used to establish the wireless communication between the devices. But this module is not capable of 5-3V logic shifting and will require an external logic level converter.

Project Implementation:

1. Initially, interface buzzer, LDR and Wi-Fi module to the Arduino board
2. Now connect the supply voltage of 9v using battery
3. Keep the LDR in light .You will see no sound is produced from the buzzer
4. Similarly keep the LDR in dark, you can see buzzer starts ringing. LED connected to the buzzer also starts blinking
5. As the intensity falling on the LDR increases sound produced by the buzzer increases
6. The data about all of this will be sent to the cloud for storage and analysis

Software requirements:

1. Arduino IDE : You will be needing Arduino IDE software to write and upload the programming logic onto the Arduino Uno board
2. Thingspeak : Also, you need to create an account in the ThinkSpeak IoT platform to integrate the system onto the cloud and store the data online

• Arduino Uno
• LDR
• 7805 IC
• Buzzer
• ic engine
• WiFi

• Smart systems
• Virtual Eye
• Light based security system