Car Copter

Published on . Written by

Turning Gravity into Lights
CarCoper is the combination the copter and car having the mixture of two technology Automobile technology and Aeronautical Engineering. Car means something mobily On land and copter means having rotational motion in form of propeller. Its really cool to make the combo of car and copter. Something we call as hybrid technology which is which an nully disadvantage of two individual mode by adding the technology.

Read more..
  1. 3.7 volt 600mah battery : A rechargeable battery, storage battery, secondary cell, or accumulator is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells.
  2. 4 micromoters : Micromotors are very small particles (measured in microns) that can move themselves. Thesemicromotors actually propel themselves in a specific direction autonomously when placed in a chemical solution.
  3. ESC(40A): An electronic speed control or ESC is an electronic circuit with the purpose to vary an servo-motor speed, its direction and possibly also to act as a dynamic brake. ESCs are often used on motors essentially providing an electronically-generated three-phase electric power low voltage source of energy for the motor.
  4. Circuit board: It is a microcontroller is a compact integrated circuit designed to govern a specific operation in an embedded system. A typical microcontroller includes a processor, memory and input/output (I/O) peripherals on a single chip.
  5. GPS Module : To configure a GPS receiver, knowing the type of chipset your GPS is using is very important. The GPS chipset contains a powerful processor that is responsible for the user interface, all of the calculations, as well as analog circuitry for the antenna
  6. Battery charger : which can recharge the battery from by converting Electrical energy in to chemical energy.
  7. Transmitter Receiver : a set of equipment used to generate and transmit electromagnetic waves carrying messages or signals, especially those of radio or television.In radio communications, a radio receiver (receiver or simply radio) is an electronic device that receives radio waves and converts the information carried by them to a usable form. It is used with an antenna.
  8. Usb cable : A solar cell, or photovoltaic cell, is an electrical device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical and chemical phenomenon.
  9. 4 Propeller : A mechanical device for propelling a boat or aircraft, consisting of a revolving shaft with two or more broad, angled blades attached to it.
  10. 4 wheels : A wheel is a circular component that is intended to rotate on an axle bearing. The wheel is one of the key components of the wheel and axle which is one of the six simple machines.
  11. Sunboard sheet: For making an model of the car its a basic Fabrication material to make your model more strong.

Final Step:

congrats you have made a carcopter now you just need some flying technique and good weather condition. BEST OF LUCK


Skyfi Labs Projects
Kit required to develop Car Copter:
Technologies you will learn by working on Car Copter:


Any Questions?


Subscribe for more project ideas