Latest Projects Based on Receiver

This project involves building a robot that uses PIR (passive infra-red) sensors to detect the human presence. It makes use of the PIR sensor application of sensing the infra-red rays that emits when heat is generated from the human body. The application of this project varies from rescue operations to finding out the capacity of humans at a place.

The main objective of this project is to build a robot that will be embedded with a robotic arm and can be controlled using a RF remote. The robot can move to remote places and do the pick & place action of objects that are dangerous and harmful. The applications of this project is vast and can be implemented in a lot of industries.

Recently, Robot Technology has gained popularity,about how to access the robot as much as easily to comfortable for that new method and technologies innovation occur.Here simple method implementing to controls the wheels of the robot.

Glider is nothing but a type of Aircraft which can fly up to a certain amount of time depending on the design and the area of lifting surface. They might have an engine for altitude gliding which can be turned off after critical lift generation. There are wide varieties differing in the construction of their wings, aerodynamic efficiency, location of the pilot, controls and intended purpose. Some basic lightweight materials like wood, plastic, and other polymer foams are generally used for manufacturing gliders.

The three main medium of transports are Land, Air and Water where this project is mainly focused on design parameter and fabricating the RC controlled Speedboat. As we know speedboats are the fastesr way to travel on water as they sail at comparatively higher speed than the conventional boats and ships. Hence the designing of boats plays an important role where the fluid dynamics is the major area to focus and optimize the design for less hydro-static drags.

Swarm technology is a concept based on Artificial Swarm Intelligence where there is a master robot and one or more slave robots, the job of slave robots is to follow the instructions of the master robot. This technology can also be seen in nature like the flock of birds flying in a formation or with the colony of bees and also in a school of fishes. Swarm technology is a concept based on Artificial Swarm Intelligence where there is a master robot and one or more slave robots, the job of slave robots is to follow the instructions of the master robot. This technology can also be seen in nature like the flock of birds flying in a formation or with the colony of bees and also in a school of fishes.

Generally humans coordinate with each other to complete certain tasks like lifting heavy weights, carrying long items etc. Similarly we can achieve the same coordination between the robots using Swarm Technology. Through this project you are going to build two unique Walking Robots which works based on Swarm Technology.

Robotic arms are used in various fields like Industries, Medical and many more. In industries the robots are used in the manufacturing process, packaging, in the production line, these robotic arms are used in the place where human intervention is impossible. In the medical field the robotic arms are used in operating the patients in a surgery. The robotic arms can be controlled by many means, in gesture based control of a robotic arm the user can control it precisely by his hand gestures.

The robots which are based on wheels can move only on flat surface, and even when there is a hurdle in front of any wheel the robot cannot cross the hurdle or go on it. What if the robot can not only be able to cross the hurdle but also can climb the stairs. In this project idea you will be able to start building a robot that can cross any hurdles.

CarCoper is the combination the copter and car having the mixture of two technology Automobile technology and Aeronautical Engineering. Car means something mobily On land and copter means having rotational motion in form of propeller. Its really cool to make the combo of car and copter. Something we call as hybrid technology which is which an nully disadvantage of two individual mode by adding the technology.

Basically this is all about to reduce the weight of the car by using a balloons instead of wheels. It a combination of both electric and light weight wheels. You can call it as Hybrid car which fits in eco cytheria and no emission invention.

Transferring data between smartphones is quite easy with the help of apps like xender and share it. But when you are switching over a brand PC, data transfer from your old to new PC is sure to bring down your excitement. In this project, you will learn to transfer data using a cheap RF module (433 MHZ) and Arduino.

Latest Projects based on receiver