Latest Projects Based on Plastic

Radio Controlled flying wing one type of elongated or extended wing aircraft having more surface area on wing creating more lift.There are no embellishments or fuselage, its lightweight and fairly easy to assemble of these aircraft are having Delta shape (triangular). Its a kind of delta wing Aircraft having high speed as compared to commercial aircraft. The lift and thrust forces are much more than normal aircraft. Basically, they are made fabricating one long piece of Wood/ Coroplast/ Polyforms.

We call this as ornithopter, means a mechanical flying machine which can mimic a bird up to 80% and Engineers are trying their best to make this bird most efficient. Basically, these are categorized by flapping wings flying machine which generate lift through the atmospheric air. This machine differs from a temporary power plant or limited ( temporary) power sources. The best application they can be used for Spying, surveillance, surface analysis.

Drones are something we call as UAV(unmanned Aerial Vehicles) an aircraft without an human pilot. UAVs are basically an ground controlled system means they are fully Autonomous. Application of Drones are expanding from commercial, scientific, recreational, agricultural, and other applications.IT can be used in Landways, waterways, airways or in space. The advantage of Saucer shape is that is more aerodynamic as compared to other shapes and as it has only one rotor its quite difficult to fly.Due to is shape its having some angle 30 to 60 degree when the drone is parallel to ground. The use of solar here to increase the endurance of the flight by transferring power to the Rechargeable battery. Well, it's difficult to obtain the optimum amount of voltage and current (V= IR).

Basically this is all about to reduce the weight of the car by using a balloons instead of wheels. It a combination of both electric and light weight wheels. You can call it as Hybrid car which fits in eco cytheria and no emission invention.

On this modern age the composite materials are become the primary material for any engineering production because composite materials have several specific properties such as high strength to weight ratio, low cost, and ease of fabrication, tensile strength, compressive strength, Impact strength, high resistance to thermal which does not realize in pure material or non-composite material. Because of its vast application, a Mechanical Engineer should know how to fabricate and teste a composite material. In this project, you will be using two waste materials i.e. bagasse and waste plastic to produce a composite. The composite can be used for the purpose of heat insulation which we can apply in our rooftops or any place where we can reduce the heat transfer. The main aspect of our project is to produce something useful out of waste materials.

Soil stabilization is the process of improving the physical and chemical properties of soil. Stabilization helps to increase the shear strength and controls the shrink-swell properties of soil.

Latest Projects based on plastic