Latest Projects Based on Bldc Motor

An ornithopter is a flying machine technology that is adapted from the flying motion of real bird. Its working principle similarly to birds where it can flap the wings to fly. If the ornithopter is flying along with real birds no one can able to identify which one is real and which one is Robot. Because of that, these flying machines are used for tracking purposes as a spy bird.

These days drones are playing a very important role in all the sectors including the surveying lands. Drones make surveying of lands much faster than the conventional methods. Now drone simplifies the collection and analysis of geospatial data, allowing professionals to make better decisions.

Generally, as we know drones are can able to perform position held in the outdoors with the help of GPS module. In case if it is indoor it's very difficult to perform position hold why because the GPS cannot be able to receive the satellite signal.

It's a combination of both fixed wing and multi-copter. For flying fixed wing drone you need a bigger area for takeoff and landing. For multi-copter, you don't need a bigger area for takeoff and landing. But the fixed wing can carry more loads with less power consumed than the multi-copter. For the multi-copter, you don't need more area where it can fly any places.

In conventional drone lipo batteries are used as a power source where you need to charge for every particular time period. The charging time alone will be taking more time due to which you cannot do continues flying. By adding the IC engine and DC generator with the conventional drone you can build a hybrid drone.

Whatever the drone that is available in the market, it has the endurance of maximum 30 - 40 minutes only. Once the battery got discharged, again that battery needs to be recharged completely to go for the next ride. Also it takes a lot of time to get recharged, which is a major issue in most of the UAVs that we see today.

Vertical takeoff and landing RC plane does not require more area for taking off and landing. To make this vtol we need a flight controller which can act as a brain of the vtol.

This is one of the most widely used UAV in all the places for different types of applications. Whether it is a quad or hexa or octa copter, this concept is the most widely used one. Here you are going to learn how to build a multicopter UAV.

In industries, nowadays the temperature control has control conquered many of industrial sector in the industry plant where the air is cooled in order to maintain the temperature control.

Swept wing is a type of wing configuration used in fixed-wing aircraft. There are two types: Swept-back (wing is angled backward) and Swept forward (wing is angled forward). This project deals with the fabrication of forward-swept wing remotely controlled aircraft. Forward-swept wing aircrafts are highly maneuverable (ability to change direction quickly) at low speeds and drag produced is also low compared to backward-swept wing aircraft. The characteristic "sweep angle" is usually estimated by drawing a path from root to tip, twenty-five percent of the way back from the leading edge, and matching that to the perpendicular to the longitudinal axis of the aircraft.  Wing sweep has the effect of delaying the shock waves and accompanying aerodynamic drag rise caused by fluid compressibility.

Drone swarm is a way towards the coordination of many drones as a single system. Multi-robot systems own greater adaptability, performance, and safety than individual robots, a crew of collaborative robots can do a particular task much quicker and execute tasks beyond the limits. Swarm robots can perform a complex task easily with the help of many specialized simple robots. Drone Swarm is the mixed technology of swarm robotics and UAV systems.

The main purpose of this project is to minimize the loss of life in times of catastrophic failure of the hydraulic system or case of failure of engines. A new design concept that has the potential to save the lives of a thousand passengers in the event of an air crash. The notion involves the redesigning of a plane with the detachable wings that would eject during the emergency to touch down on land or water safety. It is the method of detaching the wings from an aircraft which is in the state of an unrecoverable stall, which could add up to damage in time of catastrophe.

In this project, we are going to fabricate an aircraft with detachable wings and the Orion parachute system (3 parachutes). Later creating a 3D model of an aircraft and run analysis over the model and obtain the results. At last a field test is conducted based on flight data requirements.

There are different types of security system that are available in the world but most of them are having some disadvantages. One of the disadvantages is Closed Circuit camera is fixed on the walls and can record only one side at a time, so it can be damaged from the other side.

Hovercrafts are vehicles that travel over the cushion of air created with the help of motors and propellers. Hovercrafts can reach almost all the terrains on earth. The principle behind the development of air-cushion is the closed plenum effect. The high-pressure air is accumulated below the hull with the help of motors and propellers. The skirt is used to increase the ground clearance of the vehicle which helps to achieve the smooth ride over big tide waves, rocky terrains, etc. In this article, you will learn to build an RC Hovercraft using Arduino.

Racing drones can reach speed up to 150 Km/hr. These drones are used by drone enthusiasts for racing, to shoot videos and to perform stunts, etc. By implementing artificial intelligence and computer vision techniques into these drones we can make it autonomous which helps in reaching much higher speeds than the speed achieved during manual control. In this article, you will learn to build an autonomous racing drone from scratch.

In this project, you will learn how to build a fire fighting drone, which can able to detect and put off the fire both autonomously and manually. Making a final year project on drones will definitely help you to build a nice career. 

In recent years drones gained more popularity because of its wide range of applications and the day to day advancements in their features. Fire fighting is one of the difficult tasks where firefighters risk their lives to save the victims. To make the rescuing process easy and safe, drones are implemented to extinguish the fire.

Technological advancement has proved the impossible things as possible. Similarly, the recent innovations in UAV’s (Unmanned Aerial Vehicles) which are commonly known as drones paved the way for the newer way of transportation not only for carrying goods but also to carry humans from one place to another.

Increased usage of Automobiles like cars, bikes in the metro cities escalated the traffic and also increased pollution. To overcome both the issues here we are going to develop a drone project which can able to carry passengers from one place to another like a taxi.

Latest Projects based on bldc motor