Latest Projects Based on Testing

Retard-bonded prestressed concrete has been in use for twenty years and is a new and distinctive prestressed system. Mechanical and service property

Many of the engineers and researchers have done research on composite materials and they found that the composite which is made from two different materials with different chemical and physical property when combined produce a material with characteristics different from individual components. In this project, you are going to fabricate a composite material using Epoxy and Polyester as matrix phase and bamboo as fiber.

In order to enhance infrastructure projects, large civil engineering projects are executed in India. Due to space constraints and time limits infrastructure facilities have to often build on site where the soil conditions are not ideal. This is where the geotechnical engineer plays a critical role in improving the soil conditions. The method of ground improvement adopted depends upon the nature of strata and the purpose of improvement. Under different improvement techniques, ground improvement using stone columns offers a proven and economical solution. In this project, you are going to make a stone column with different composition to know which composition gives more strength to the soil.

Concrete is considered the world’s most used construction material. Typical concrete mixtures are comprised of water, sand, cement and an aggregate of rock. This civil project focuses on the coarse aggregate in concrete. Here you will replace the coarse aggregate by burn brick or Jhama brick and you will study the effect of salient parameters that affect the properties of Jhama class brick based concrete. You will also study the short-term mechanical and physical properties of fresh and hardened Jhama class brick based concrete.

The durability of existing concrete structures always depends upon the properties of hardened concrete. To find the safety of any existing concrete structures,

Liquefaction is a process that leads to soil suddenly losing strength, As a result of ground shaking during an earthquake. However, not all the soils liquefy during an earthquake.

Fiber-reinforced polymer composite is the preferred material for the construction of aircraft and spacecraft. Even used as structural materials for the development of fuselage and due to its applications in the various field, it is used as a primary source for designing aircraft.

Aircraft safety is improving by analyzing the defects in the fuselage and catastrophic failure investigations on aircraft structural components. The primary cause of failure identification and the analysis enable recommendations for corrective action.

A Hybrid rocket is the combination of solid and liquid propellant. In most common cases solid-state fuel is used and the oxidizer used is in the liquid or gaseous state. The Hybrid rocket is a kind of safe propulsion and low cost when compared to the solid and liquid propellant rockets. The solid propellant and liquid or gaseous oxidizer are stored separately. The oxidizer is passed over the solid fuel through the injector and then combustion takes place and the hot gases exhausted through the nozzle.

In today’s world, the search for new materials with innovative mechanical properties and sustainability is important. In spite of many advantages, natural fibers have some disadvantages like low thermal resistance, high moisture absorption, etc.

The landing gear is a structure, which supports the aircraft in the ground. A major part of aircrafts load is transferred to the landing gear during take-off and landing. These loads are then transferred to the airframe through landing gear beams. Wheels of the landing gear are added as per the size of the aircraft. The position of the landing gear depends on the design, type, and load of the aircraft. Some landing gear is mounted on wing and some under the fuselage.

In this project, we are going to create and analyze a 2D and 3D model of lug attachments in the landing gear.

An ornithopter is a type of aircraft that flies by flapping its wings. Designers try to mimic the flight of birds, bats, and insects.

In this project, we are going to design and develop a scaled 3D model of ornithopter resembling an eagle. Then, kinematic data is obtained from the 3D model of ornithopter and fabricated to the required dimensions.

An unmanned aerial vehicle (UAV), commonly known as a drone, is an aircraft without a pilot on board.

In this project, our main objective is to fabricate a composite material combining depron, glass fiber, and balsawood strips to form three different combinations of composite material.

Construction is a work that leads to environmental degradation that has resulted in global warming and climate change. A good example of degradation in construction work is the emission of carbon-di-oxide accounted as the 2^nd largest after electricity generation which is around about 930 million tons/year or approximately 7% of the total CO₂ emissions.

Nowadays, the steady increase in traffic intensity in terms of commercial vehicles, and the seasonal temperature variations are throwing us into a situation to think some alternatives for the improvisation of the pavement quality and characteristics by applying some necessary changes which shall fulfil both the economic aspects as well as strength.

The Aluminium element was discovered 200 years ago. After the technological development, Aluminium alloy is being used in structural applications even in the civil engineering field. It is the 2^nd highly used metal after steel, and it is been used in all sectors from commercial building to a domestic dwelling. In the UK about 40% of Aluminium is used only in the construction industry which will be equal to 150000 tonnes of Aluminium per year.

Around 110,00,000 new vehicles are been added to Indian roads every year. Due to this, about 3 crores of tyres are been discarded by the vehicle users every year and causing a potential threat to the environment.

Compressive strength is the resistance of a material to break under compression. The compression test is usually performed in a universal testing machine. This varies from tabletop to large machines. To avoid large machines, we have introduced machine learning and automation in construction.

Insects owe much of their evolution success to flight. Compared with their flightless ancestors, flying insects are better equipped to escape from their predators, search food sources and get adjusted to new habitats. Because their survival and evolution depend on flight performance

Latest Projects based on testing