Latest Projects Based on Cfd

About the project

As well all know that it was the wright bros who gave the first successful manned flight to the world, and there are better proofs that eight years earlier to wright bros, an Indian Sanskrit scholar S B Talpade designed a basic aircraft called marutshakti, unmanned aerial vehicle at Chowpatty beach in Bombay, crediting him the first creator of an aircraft in modern times. He used Vedic technology for designing the aircraft.

It is expensive to use physical experiments to get essential engineering data for designing is quite expensive. Getting engineering data of a fluid in motion, using Computational Fluid Dynamics (CFD) Simulations are relatively inexpensive. Costs are likely to be decreased as computational power has increased. So, using numerical methods to solve various flow problems is effective. In this project, you are going to solve a 1D Shock tube problem using Finite Volume Method.

Fin is nothing but an extended surface found on the heat exchanging devices such as radiators in Car, Bike engines, Computer CPU heatsinks and Heat exchangers in power plants. An efficient Fin can really increase the performance of a system. There are various types of Fin and analyzing those theoretically takes a lot of effort. So, researchers around the world take help of numerical methods to analyze complex problem such as heat transfer through Fin. In this project, you will work on solving the various type of fin using numerical methods and compare it with a theoretical solution where it exists.

Thrust vectoring is one of the technologies used to overcome the challenge for innovation. By vectoring the exhaust jet, the engine’s thrust is used to control the aircraft. In supersonic fighter aircraft thrust vectoring is one of the major phenomena used for VTOL/STOL and maneuvering. But in commercial aircraft thrust vectoring is used to prevent catastrophic failure and for Short Take-Off and Landing.

ICEM is a software developed by ICEM CFD engineering which provides classy geometry tools for mesh generation, pre-processing and mesh optimization tools. It is used for manufacturing applications such as computational fluid dynamics and mechanical analysis.

A nozzle is a relatively simple device, just a specially shaped tube through which hot gases flow. The purpose of the nozzle, in subsonic flow, is to constrict the airflow, thus critically increasing the thrust as it leaves the engine.

Latest Projects based on cfd